Design a site like this with
Get started

Solar Panel Installation Guide

If you are considering installing solar panels for your home, you should know that the installation process can take from one to three days. This can also depend on the size of the system and if you need a power meter installed for net metering. Once you have your solar panels installed, you need to complete a few steps to make sure your new system is installed correctly. The following guide will walk you through the installation process step-by-step.

First, you need to fix the solar panels on the mounting structure. Use nuts and bolts to secure the panels in place. Generally, you should use a series connection to connect the Positive (+) wire of one PV module to the Negative (-) wire of another. This will increase the voltage of both solar panels and the battery bank. The second type of connection is the parallel connection. In a parallel connection, the negative (-) wire of one panel is connected to the other panel’s Positive (+) wire. This way, the voltage of each panel remains consistent.

Once you have a good system setup, you can begin generating power for your home. It may be beneficial to hire a solar panel contractor to help you with this process. The process involves completing permits, electrical inspections, and interconnection with your utility company. You may also need to install a new electricity meter to make sure you have a solar system. You may also want to ask about net metering, which gives you credit for excess electricity that you send back into the grid. In some states, this type of program will make you more money and accelerate the payback period of your solar investment.

After completing the installation, the installers will place the solar panels on the roof and connect them to an inverter. This is what converts direct current energy into alternating current electricity. The solar panels are then connected to a battery that will provide backup power in the event of an outage. Once the panels have been installed, the installer will test and check the system to make sure it is working properly. They may even leave you a certificate of completion. Click here to contact Blue Raven Solar for installation services.

After you’ve chosen a solar installation company, the next step is permitting. Before solar panels can be connected to the grid, a representative from your town’s government will visit your home to inspect the installation. The inspector will check for correct electrical wiring, proper mounting, and overall installation. Only after all of these steps are complete can your solar installation be completed. This is also an excellent time to install a net meter, which lets you send excess power back to the grid when you are not using the system.

Before you start the installation process, make sure your home is in the best location for solar panels. The best place for solar panels is a southern-facing roof, since they get more sunlight and work better in the winter. When installing solar panels, you also want to make sure that you install them in a way that doesn’t create a lifting effect. Otherwise, the wind will rip the panels off the roof and leave you with an unfinished home. Add on to your knowledge about this topic, by visiting this link:


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: